Pattern Review McCall’s 6751

Posted on Jul 10, 2013 | 0 comments

Well  I made it to the Blues Festival this last weekend and it was fabulous!  There were so many different blues artists playing on stages all over the park in downtown Portland.  At midday on Saturday, my chicadees and I left land and stepped on the Portland Spirit and took a blues cruise down the Willamette River.   The Sister Cruise, it was called, with blues singing sisters that rocked that boat!  For a short spell, we stepped out on the lower back deck to see some sights and that’s when I took the above picture.   I wonder what it would be like to live in a houseboat?  Lived on a sailboat once for about six months (that’s another story!) but I don’t think that’s the same.

Anyways, I wore my latest dress, the McCall’s 6745 halter dress for this day and guess what?  It happened again.  When I was standing on the deck taking my pictures, the wind whooshed in and blew up the hem of my dress, I mean UP!  It took me a couple of seconds to realize, but by then it was too late!  I quickly grabbed the skirt of my dress and pushed it down, turned around and there was an elderly woman and her husband sitting in chairs watching me.  I asked her how much I flashed and she said “well, quite a bit, but don’t worry, it didn’t look bad.”  Hmmm… I wasn’t sure what she was saying but with as much dignity as I could muster, while holding onto my skirt, I gave my best smile and headed back into the cabin.

Maybe I should have worn a top and shorts instead of  “the flashing dress” to the Blues Festival… if  I had, I think I might have worn my new McCall’s 6751 top.

Mind you, I haven’t made the top shown above – it is top B.  I made top A which shares the same front, but has a different back.  Below is the drawings that includes top A.

Since the pattern is drafted for x-small through XX-large, I decided to throw my fate to the wind, pass on sewing a muslin, and just cut and sew!  I was using some fabric that I had in my stash so other than the time I would spend sewing it, I wouldn’t be out anything so why not.  I usually wear a size small so I decided to stay with this size, but I did adjust the pattern pieces to be medium at the waist because sometimes RTW (ready-to-wear) tops tend to be a smidge tighter in this area than I like.

The fabric that I used is a pale pink rayon and has a slight stretch to it.  I didn’t particularly like sewing it.  It was kind of like sewing peach skin fabric which I will never be sewing again, don’t like to sew that stuff at all!  This rayon was not quite that bad, nonetheless, the 2 yards I have left may never see my sewing machine.

The pattern instructions are really easy to follow, however, I am not real fond of the finishing technique used for the neck and armholes.  Maybe it’s me, but I cannot get a nice finish in these curved areas by simply folding the fabric into a narrow hem.  The second technique they suggest is to use bias tape.  I am not a big fan of packaged bias tape – yes, I have used it, but it feels and looks sort of cheezy to me.   Instead of either of these, I opted to make my own bias tape, which I made from the pink rayon and used my Clover Bias Tape Maker.

It comes in two sizes, 1/2 and 1/4 inch.  I have the 1/2 inch.  Using this little gadget is the easy part of making your own bias tape.  The work comes with cutting out your strips and sewing them together.  An important point in your success is making sure you cut every strip a width of exactly 1 inch.  Sewing it to the neck and arms can be a bit tricky too, especially with certain fabrics like pale pink rayon.

When it was time to apply the bias tape, I baled on the instructions and attempted to do my own thing.  While writing this review and re-reading the pattern instructions, I now realize that I made it harder than it had to be so I will not even explain what I did but I’m such a dork!  You can still follow theirs using your own bias tape and be just fine.

I wanted to add my own touch so I opted on making a pocket different than the one given with the pattern.  This is what I ended up with.

The back is interesting.  I’ve seen lots of tops in clothing stores in this style and really like the look.

Wearing them is sort of different though.  Still not sure what I think, but this is it.

And then there is the front view of course!

I still haven’t decided whether I want to make top B or let it rest.  If I did make it, I’d get more practice making bias tape and applying it… hmm… guess I will be making top B after all!  When we started our photo-shoot, my daughter informed me that she wants one of these too.  I guess you know what that means… it’s time to start drinking this glass of wine!

Salute!  Jessica

Pattern Review McCall’s 6745

Posted on Jul 1, 2013 | 4 comments

We are having a heat wave here in Oregon, first one for the summer and given that this is Oregon, it could be the only one.  Some dismiss us Oregonians as whiny because our warmest days don’t usually get much higher than 99 to 103, but keep in mind that we have few of them, so how can we get use to them.  AND there are many of us who do not have air conditioning!  Why?  Well, most of the time we are wearing fleece so why do we need air conditioners?!!  This is heat wave day 4 (89 , 91, and 95 for the last 3 days) and my house is barely cooling down enough to be able to sleep at night.   I have looked so forward to the summer because I was tired of cold and rain… I am determined not to get grouchy, to stay positive, to stay cooooool.  Speaking of cool, this weekend is the Blues Fest in downtown Portland and since the temperature prediction is the high 80’s, I plan on wearing a dress that I recently finished, one that I really love, made with the McCall’s 6745 pattern.

McCall’s 6756

I think what fascinated me most about this dress pattern was that piping was used to trim the bodice.  Piping creates a look that has always caught my eye when it is sewn into a garment.  I have used it enough times that I eventually purchased a piping foot for my sewing machine and it makes the job much easier.  The pattern instructions say to use a zipper foot…I don’t know about that.  I would love to hear from anyone that has tried sewing piping with one.

This is what my piping foot looks like.  I have a Husqvarna 750 Platinum.

It took me over a month to find fabric that I could see this dress in.  I loved the colors in the fabric of the dress shown on the pattern envelope but I’m not big on the southwest look.  I do love teals as well as the deep cobalt blue that I’ve been seeing in lots of RTW (ready to wear) garments shown in magazines but alas, no printed fabrics with these colors in either fabric stores or on-line fabric stores.  What’s with that!  I probably know why but I won’t go there because it could cause me to rant.

I eventually decided on this, far from blue, but I really love this color too.  (wow-I just rhymed) The fabric is fine cotton and for the lining I chose a salmon colored voile.

Before cutting into my beautiful fabric, I did what has become habit, made a muslin.  With experience I have learned how much circumference I need for my hips and waist so I chose not to make the skirt part of the dress, just the bodice.  Thank goodness because there was naturally a fitting issue.  It seems to always be the same for me, the area just above the bust and next to the armhole.  I need a size 8 everywhere but this spot.  I decided to try something different since up until now I have remedied this problem by making adjustments to either the shoulder and/or center front neck, though neither really fix the problem that well. I have to share this even though this is suppose to be a pattern review because it was a major revelation for me!

I first traced the front pattern bodice piece on tracing paper.  Next, I marked a spot 2 inches up from where the armhole starts.  From here, I made a second mark 1/4 inch further up from this mark.  Using these two marks, I created a dart drawing a line from each all the way to the top point of the waist dart.  After briefly admiring my lovely new dart, I cut it out!  I then drew a line from the bottom of the waist dart at the center between the two dart legs, all the way up to almost the tip of the lovely new dart I cut out, leaving a smidgen of tissue paper to act as a hinge. (the standard method is to cut the waist dart leg closest to the side seam but I was was in experimental mode, and being a rule breaker, as usual!)  Using the hinge, I then swung the section of bodice nearest center outwards closing my lovely dart!  Essentially what I did here was to remove the extra fullness at the armhole I didn’t want by first drawing in a dart that would remove it but then moving that dart and it’s fullness to the waist dart.   It was then the final test.  I made a 2nd muslin and when I tried it on, I tasted sweet success  (like eating chocolate if you are chocoholic like me).  It worked!

I love chocolate!

Now back to our review.  The pattern instructions are clear enough to understand, but I would consider this pattern to be an intermediate skill level, partly due to the piping, but also because of the pivoting that happens in the center front of the bodice and all the pleating in the skirt.  I am not sure if I pivoted properly, but did achieve a look I could live with.  It might have been easier if piping had not been involved!  (Sounds like I’m dancing)

The darts are to be cut open and ironed flat.  By doing this, you distribute the extra fabric of the dart evenly creating balance.  This is an haute couture technique which I love, but you certainly need to be sure that you have done your fitting because once it’s cut, there’s no changing anything!

I basted the piping to the bodice but had a difficult time removing the thread after sewing the bodice and bodice lining together.  I used the loosest stitch my machine sews.  I try to always remove any temporary basting after the final seam is sewn because the fabric seems to lay smoother, especially when there are a number of layers.

With the bodice finished, I was ready to move on to the skirt.  Be warned, you will need some patience for this.  I made all my markings for the pleats on the wrong side of the fabric but the picture instructions show you how to do the pleats on the right side of the fabric.  Maybe the best way to do this would be to make tailor tacks (marking all the large and small dots with thread) on the right side but because I was not paying a lot of attention to the pictures when I first read the instructions, I missed this kind of important detail.  There was a whole lot of pinning and I think a whole lot of swearing going on and fortunately the fabric I was using was forgiving of the pins and me!

The two back pieces each have four pleats.

The front has two double (yes double) pleats on each side of center.

Here is a close up so you can see what I mean when I say double.  It may be a bit confusing looking at the picture, but the main point here is that I want you to know that two pleats are stacked on one another which I found sort of confusing at first when following the instructions.   I need to find out the techy way of putting pointers on my pictures so your eyes are directed to what I’m talking about.  I’ll get there, soon, promise 🙂

I was a little worried about the thinness of my fabric and the skirt without a lining since it was not called for but when I finally finished my skirt, I knew exactly why there was no lining.  And I certainly didn’t need to worry about see through.  There’s a lot of fabric in that skirt, especially when it came to having to hem it.  I made a 1 inch hem instead of a 5/8 inch like the pattern recommends since dresses are usually too long for me.  Now I wish I would have made it a 2 inch hem but it took me an hour to sew by hand so I think I’m good with how it is!

So here’s my dress!

And the back.

Notice the interesting color line on my back.  Got this after 20 minutes in the sun watering my plants on Saturday.  Lots of Aloe Vera Gel for the first 24 hours!

So there it is – McCall’s 6745.  I’m not sure if it’s the fabric or the style of dress but I feel girly when I wear it.  Several weeks ago I wore it to an American Sewing Guild Garment Lunch and when I left the restaurant, the wind caught my skirt and blew it up.  I mean UP!  It was sort of a Marilyn Monroe moment but I wasn’t feeling very Marilyn.  I was worried more that someone saw my butt!  Oh well – it made for an interesting moment.  Wonder what I should expect this next weekend at the Blues Festival.  Part of the day I will be on a boat cruise floating up the Willamette River listening to Blues singing women and drinking wine and the remainder of the day sitting in my beach chair, listening to more blues singers and socializing.  Hmm…I’ll have to get back to you on that!

Salute!  Jessica